Tensile Multi Roll Coating Adhesion Tester With Drying Method
|
... used raw materials: Base material: pet, BOPP, PP, paper, etc Glue: oily, water-based glue, etc Main coating methods:Direct scraping coating. Mechanical specification: L* W * H(about 5800 * 1500 * 2650 (mm)...
Dongguan Liyi Environmental Technology Co., Ltd.
|
HKSM-1 Puller Adhesion Tester Pull Method For Coating Large LCD Digital Display
|
... material, adhesive, chrome plating, nickel plating, concrete and other material coatings. The working principle of the instrument is to use the hydraulic system to measure the adhesion of the coating of a certain diameter on the surface of the matrix. The...
HUATEC GROUP CORPORATION
|
SY-M 10KN Digital Pull Off Adhesion Tester 0.001KN / 0.001MPa Resolution
|
...Adhesion Tester With Four Different Sizes Dolly SY-M 10KN Digital Pull-off Adhesion Tester Application: It is used to test the pull-off adhesion strength of the coating on steel surface, concrete surface or other material’s surface. Standard: ISO 4624 Paints and varnishes - Pull-off test for adhesion ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers......
Beijing Samyon Instruments Co., Ltd.
|
GB/T1720-88 JISK6894 Paint Testing Equipment Film Adhesion Tester
|
... Adhesion Tester Paint Testing Equipment Standard: GB/T1720-88 JISK6894 Description: QFZ film adhesion tester is used to determine the adhesion of various coatings to the coated surface.The film adhesion performance was measured by the tracing method, and......
Hebei Better United Import And Export Co., Ltd.
|
Gb/T 4852 Initial Adhesion Tester St106 Table Width 120mm Adjustable From 0～60 °
|
...adhesion tester The ST106 initial adhesion tester, also known as the initial adhesion tester or tape adhesion tester, is designed and manufactured according to the requirements of the new version 2025 of the Chinese Pharmacopoeia "0952 Adhesion Determination Method - First Method - Determination of Initial Adhesion". The equipment adopts the inclined rolling ball method, which tests the initial adhesion......
Shandong Shengtai instrument co.,ltd
|
YDT757 Galvanized Coating Adhesion Hammer Test Device With Oak Handle
|
...Coating Adhesion Hammer Drop Test Device Product Overview: This test device conforms to the YDT757 drop hammer test method, and is suitable for hot-dip galvanized coating adhesion test. It uses a hammer to drop freely to hit the sample to test whether the galvanized coating......
Sinuo Testing Equipment Co. , Limited
|
ASTM D3363-00 Pencil Scratch Method Film Hardness Pencil Coating Hardness Tester
|
...Method Film Hardness Pencil Coating Hardness Tester Product details Coating hardness is the necessary measurement for the performance of coatings. This instrument applied the Pencil Scratch Method. It is a fast and economical way to determine the film hardness using the drawing lead core or the pencil core. The pencil scratch method for coating hardness testing is a common method......
HUATEC GROUP CORPORATION
|
1PH, AC220V, 50/60Hz 0.5% Accuracy Computer Tape Peel Adhesion Tester / Tensile Strength Testing Equipment
|
... force of ASTM D3330 pressure sensitive tapes FINAT 01 (180 degrees) 02 (90 degrees) 03 self adhesive low speed release force test Uses: 0.5% Accuracy Computer Tape Peel Adhesion Force Test Equipment / Release Strength Tester is designed for...
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
High Temperature 2000g 20 Groups Tape Adhesion Tester
|
...Adhesive Tape Tester Test principle: Test board with adhesive tape vertically hang on the test rack, and hang stipulate weight of weights at end, arrording to the displacement of the sample after a certain time or the time of complete departure of the sample To test the ability of adhesive specimen to resist pulling. Design Standard: 1. GB 4851 pressure sensitive adhesive tape holds the viscosity test method......
Guangdong Aisry Instrument Technology Co., Ltd.
|
Reducible Water Based Floor Coating / Fast Drying Concrete Paint Adhesion TDS
|
...Drying Water Based Epoxy Coating For Concrete Flooring Product Descriptions: Product Name Water Based Epoxy Paint Drying time (25℃) Touch dry≤4 hours / Hard dry≤24 hours Adhesion Strength, Mpa ≥2 Wear resistance (700g / 500r) ≤0.03g Pencil Hardness (H) ≥3 Coverage (advise 2 coats) 0.2kg/sqm per coat Quick Details: WB Epoxy Coating is a versatile water-based epoxy resin designed for safe and effortless application. This coating......
Guangdong Crekoat New Materials Co., Ltd.
|
Submit your “drying method coating adhesion tester” inquiry in a minute :