Custom Barrel Mooring Buoys

Marine Accessories Custom Barrel Mooring Buoys PE Floating Buoy

Barrel mooring buoy is one kind of representative mooring buoys. Barrel-type mooring buoy has a barrel shape.

The steelwork construction through the buoy’s middle vertically. It can be supplied with handling crucifix and chain-through design. The barrel mooring buoys are constructed by resilient closed cell polyethylene/EVA foam around the inner central steelwork, covered by polyurethane (PU) other skin. The resilient closed cell polyethylene/EVA foam core guarantees self-fendering and unsinkable even in case of damage. And self-colored polyurethane elastomer skin is resistant to abrasion and ultraviolet ray degradation.

For extreme service environments, the polyurethane elastomer skin can be reinforced by nylon to protective coating has higher tear strength, making the buoy long-lasting and virtually maintenance-free.

Barrel Mooring Buoys Specification

We make two kinds of barrel mooring buoys with below-rated buoyancy.

Barrel Mooring Buoy with Chain Through

Barrel Mooring Buoys Features

Barrel mooring buoys have significant advantages, lier easier to handle, better corrosion resistance, low maintenance, never sink or burst, self-fendering that withstands vessel impact.

• PU Protective Outer Skin – Reinforced urethane elastomer skin
• Self-fendering – High impact absorption capacity
• Inner Foam – Unskinable closed-cell rigid foam core
• Upper-End Fitting – Various end fitting options available
• Internal Steel Core – For better support and balance
• Lower End Fitting – Mooring eye used for anchor connecting

various End Fittings

Steelwork and end assembly – Through central steel tube with longitudinal guests and external load distribution flanges at each end, epoxy coated or hot-dipped galvanized, are encased in a closed-cell urethane foam central body. Optional bail eye, clevis eye, swivel, chain locking plate, single locking pin end fitting are available.

Doowin Marine is a professional manufacturer of ship launching airbags, pneumatic rubber fenders, foam-filled fenders, inflatable pipe plugs, and offshore foam buoys.

Doowin Marine is the leading manufacturer of ISO 14409:2011 or CB/T 3795 rubber airbags/marine inflatable airbags. Marine rubber airbags, known as ship launching airbags or ship launching balloons, can be used for ship launching and landing, heavy lifting, and marine salvage.

Our floating fenders include pneumatic rubber fenders and foam-filled fenders. Our Yokohama-type pneumatic rubber fenders are produced and inspected in compliance with ISO 17357. Our inflatable pipe plugs are widely applicable to all kinds of municipal pipesfor blocking as stoppers. We also produce various offshore foam buoys used for surface-to-sub-sea operations at depths of up to 7000m. 

Our engineers and consultants have been in fabrication and use these products for more than 30 years. Doowin Marine has clients in the ship building, marine rescue and salvage,  energy and oil, offshore shipping, and other industries all over the world. Doowin Marine products passed a rigorous ISO 9001:2008 Quality Management System, approved by the third-party SGS, BV, CCS, ABS, LR, BV.