Product Details
Company Profile

CNC 3 Axis AB Glue Potting Silicone Epoxy Resin Glue Automatic Dispenser

CNC 3 axis 2K AB glue potting silicone epoxy resin glue dispenser automatic machine

We Daheng Automation specialize in different types of potting and dispensing system. No matter what your resin application requirements look like: we can do most of them in our fully equipped testing room.

We can handle 1- and 2-component polyurethanes, epoxies,acrylics, silicone, temperature, humidity and UV curing materials. They can be from low- to high-viscosity, filled or unfilled and even high abrasive for thermal conductivity.

Potting and encapsulation is the process of embedding electronic components & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions.

Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.

Five systems in AB potting machine:

1. Automatic material-feeding system
2. High precision pump metering system
3. Dynamic/Static mixing system
4. Three-axis motion system
5. Programming control system.

AB-component materials flows into the pump through the feeding system (AB tanks) separately by the self-suction force of the metering pump.

Features & Functions

* Auto feeding :take use of vacuum pressure to feed materials into A&B tank separately.

* Tank Stirring :A and B tank configure with stirring motors and blades to prevent material sediment in the tank bottom .
* Heating : Tank , pipe , pumps are optional with heaters to assure the whole system can be heating from room temperature to 90°C adjustable.
* Vacuum : A &B tank vacuum for degas the bubble inside material .
* Dynamic mixing : Configuring dynamic motor and mixer to mix A and B fluids evenly.

*Auto cleaning : self-cleaning and fully auto cleaning system assure machine keep in clean without any materials cure inside .

Advantages:

1,Accurated metering and even mixing helps to avoid the waste of material.
2,Dispensing volume and positioning keep machine work consistent and fast.
3,Good universality
4,Easy to program and operate.
5,Tally function, non-standard mode, primer mode, level alert, filter mode, liquid display device, preventing back-flow device and other functional device.

Application:

1. Potting&Encapsulation &Casting: electronics components , PCB board, Capacitor, power supply, transformer, ignition coil, reverse sensor, circuit board, electronic ballast , motor ,junction box ,switches, art mold ,aviation parts, aerospace parts and so on.
2. Dispensing&Dosing: LED strip , led lamp , led bulb , aluminum,led screen , display module / medical parts,medical liquid filling and so on ...
3. Bonding&doming: LCD screen ,LOCA bonding,ABS plastic / different types of stickers , badge , keychains , souvenirs ,arts , photo frame , and other arts graphics ect .

Main Applications in electronics appliances

Transformer , capacitance , power module , regulating plate ,protection module , generator , pressure
package , solid relay ,fault indicator , Sensors , junction box , clutch , wave filter , water meter , battery cover , rectifier etc. ...

Applicable Materials

1K and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials.
Two component potting materials , 2-part compound materials, AB part compound materials , 2K silicones ,2K epoxies resin, Bi-component PU, Ployerster, Polyurethane, dual-component compound material UV materials and so on .

Able to process mixing ratios from 1:1 to 10:1
Air-free
Straightforward integration with robotics or automation
Digitally controlled shot size and flow rate for precision
Storage for up to 99 different programs
Built-in level monitoring system
Material pot life alarm with automatic purge function to maintain fresh material in the mixing nozzle
Configured to your material and process
Reservoir heating and agitation options keep materials flowable, consistent and ready to use
Modular design means easy maintenance and repair

Applications

Electronics and LED potting and encapsulation
Casting
Form-in-place gasketing
Adhesive dots and beads

Specification:

ITEM	Parameter
Mixing ratio	1:1--10:1 adjustable
Working range	Can be customized
Displacement speed	300mm/s(speed)
Out-glue speed	1-12g/s per single pump
Accuracy	±2%(output volume)±2%(mixing)
tolerance	≤0.2mm
Flow control	Digital input
Program memory	99pcs-999pcs
Motion trail	Dot , line ,curve ,circle
Automatic controlling system	Touch screen (to achieve program programming, modification, storage and so on
Out-glue control system	AB glue back suction valve, achieve AB glue independent operation
Programmatically	Tech programming/or computer systems (Micro software Windows 7,Windows10 optional)
Mixing method	dynamic mixing
Power supply	220V/50Hz/1500W without heating
Air source	0.5-0.8Mpa
Viscosity range	10-30000cps
A tank	10L 25L 40L stainless tank(optional)
B tank	10L 25L 40L stainless tank(optional)
Others	AB tank ,A pump,AB pipeline heating function

Working Principle

Compound materials A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine for metering A and B resin by setting ratio, draining out material individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.

Product Tags:


*From:	Your email address is incorrect!
*To:	Guangzhou Zhengqi Technology Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Glue Dispenser
Brand Name:	D&H
Model Number:	PGB-1560
Certification:	CE
Place of Origin:	Made In China
MOQ:	1 Unit
Payment Terms:	L/C, D/A, D/P, T/T, Western Union, MoneyGram
Packaging Details:	Polywooden case
Driven Type:	Electric
Tank Volume:	10L,25L,40L optional
Mixing Method:	Dynamic / Static
Transport Package:	Wooden Packing
Trademark:	D&H
Origin:	China
HS Code:	8424899990
Supply Ability:	50PCS Per Month
Precision:	High Precision
Condition:	New
Warranty:	12 Months
Automatic Grade:	Semiautomatic
Installation:	Vertical
Customization:	Available \| Customized Request