700mm Industrial Plate Heat Exchanger Standard DN50 16bar Model G60M

Industry cooling plate to plate heat exchanger model G60M

applications: textile industry , textile cleaner heat recovery , woolen cleanout fluid heating, dyestuff plant waste liquid heating , water solution cooling , textile machine lubricating oil cooling , chemical fiber technology cooling

GHE's gasket plate heat exchanger also called plate and frame heat exchanger

Standard Design

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program.

The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.

Working Principle

Channels are formed between the plates and the corner ports are arranged so that the two media flow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.

The advanced frame structure

Plate and gasket features

Process flow combination

Factory Production

​ ​

Since 2016 ,Wuxi Green Heat Exchanger Co.,Ltd ,a professional supplier in China who is  providing each of our valued clients with the best possible solution for all their heat exchange requirements .

Luckily,Starting from a heat exchanger supplier. after years of construction and development ,GHE  now has new foucs on its supply chain advantage on  chiller unit  and air compressor.Reliable manufacturers for both products are behind GHE （International business representative）

Our heat exchangers (PHE and shell-tube heat exchanger) are widely used in Refrigeration System,Energy & Power,HVAC and other industrial applications .

Our chiller (air/water cooled screw type ) are wildely used in HVAC,industry cooling ,low temperature cooling and so on .

Our  air compressor (screw type/centrifugal type) are wildely used in steel plant,chemical plant,oil and gas ,textile,air separation and power factory 

We sincerely welcome customers all over the world to visit our company and set up business relationship for mutual benefit.