750ml Fire Retardant PU Foam Spray For Gap Filler Sealing Construction

750ml fire retardant pu foam for gap filler

Technical Data Sheet for General Purpose Construction Polyurethane Adhesive Sealant Pu Foam polystyrene spray foam spray foam house insulation

Art No. A0101 500ml/A0103 750ml

Surface Preparation

lSurface should be cleaned of dust and mortar clods

lSurface should be sprayed with water using water sprayer

lProtect window profiles from the foam’s outgrow

Product Preparation

lThe can temperature should be between +10 ºC to +30ºC

lOptimal temperature of can is +20 ºC

l If can temperature is too low, the product should be put into warm water of +30 ºC for 15 minutes or left overnight in room temperature.

Product Application Instruction

lShake the can vigorously(20-30 seconds valve down) in order to mix the components

lScrew the can onto the adaptor

lThe working position is valve down

lVertical gaps should be filled from down to up

lDo not fill the whole gap-foam grows in volume

l If you fill window or door gaps, the gaps maximum gap size should be 3 cm. Foam should not be used in gaps larger than 5 cm.

lThe speed of application and the thickness of the bead should be controlled by the adequate pressure on the gun or adaptor trigger.

l If you stop the application for time longer than 5 mins, remember to shake the can before continuation of works.

Finishing Works

lThe excess of foam should be cut after the foam has cured. The foam should not be pushed back into the gap when it’s still uncured as it will cause structural defects and worsen insulation effect.

lAfter the foam has fully cured it should be protected from UV by mortar or paint.

l If you want to keep using the same can after longer time the gun and the adaptor and valve should be cleaned with the cleaner for polyurethane foams.

Packing Details:

Detailing Images

Why choose us:

1. Over 13-year manufacturing experience;

2. 11-year golden supplier on .com;

3. Exporting experience in over 80 countries;

4. Quality Guarantee: ISO9001,REACH,TUV, Factory Audit, SASO;

5. On time delivery, professional R&D team, satisfied sales service;

6. Customized product available.

Plyfit Industries China,Inc. was established in October 2003, we are an industrial corporation specialized in developing, manufacturing and marketing chemical products including aerosol car care product and spray paint, etc.

Our factory occupies 44,000 square meters, with advanced equipment and production lines, we are devoting in providing customers with quality products and excellent service.

As early as in 2004, we have passed ISO9001: 2000 international quality management system.our products have all achieved the European & USA standards of quality, environmental protection and security. In addition to the EU REACH certification, our specific products have passed the TUV and CEST test and get the INTERTEK certification for EN71 non-toxic (non heavy metal) test.

While backed up by the modernized advanced production facilities, more importantly, we hold an outstanding RD/production/management & marketing team consisting of skilled workers, experienced engineers and professional managers. With more than 10 years experience in this industry, we are holding mature formula and advanced technology, we can provide comprehensive solution from design, RD ,production to marketing according to customer’s requirement.

So far, we have exported to more than 70 countries and regions in the world, including the United States, Canada, Japan, Russia, Europe (such as Germany, Spain, Britain, Denmark ... ..), South America, Australia, The Middle East, Southeast Asia, Africa,etc.

Today, PLYFIT continuously dedicates effort to technology revolution for better quality ,service and higher customer satisfaction.

Besides traditional business, we are keen to establish long-term cooperation with you on OEM or ODM business.

Profession creates good life!