ESD Tripod Turnstile Gate , Waist High Automated Security Gates
With Lcd Screen
Operation of ESD systems:
When press the test button ,test results within 5 seconds will be
shown on the LCD screen ,if the press time is larger than 5
seconds,testing will be stopped automatically.Do not press the test
button heavily.The test procedures are very simple and easy:
Operator stand on the footplate with heel grounder or anti-static
shoes,connect wrist strap and plug socket or alligator clip into
the wrist strap jack,then press”PRESS TO TEST”button,LCD screen
will tell you the test results.
Testing OK comes with beep sound and opening gate signal,operator
need to push gate to enter.If testing NG need to check footwear or
repeat the testing procedure.
Features of Tripod Turnstile Gate:
1.Equipped with standard card read window, can be connect with
2.With function of break down self check and alarm,easy maintenance
3.Tripod Turnstile can be connected with any control device and can
be controlled by external button or remote control. Can set one or
bi-direction passing at will.
4.Auto reset function:
Arm rotates 120 degree and auto resets after detection of
Auto cancels passing right and resets if the passgers does not pass
within specified time.(the time can be set by operator)
5.Lighting indicator :High brightness passing indication.
6.Anti-follow function: tripod turnstile arm rotates 120 degree for
normal passing and will hold tight and alarm if there has trailing.
7.Anti buffering function: tripod turnstile arm holds tightly after
rotating corresponding angle to realize humanized protection .and
auto reset when the external force disappears.
Photo of ESD tripod turnstile gate:
Specifications of Tripod Turnstile Gate:
|Turnstile type||Tripod turnstile gate|
AC220±10%V 50Hz/AC110±10% 60Hz
Access device input voltage
Dry contact or 12V electrical level signal or > 100ms 12V
impulse signal, driving current > 10mA
Max flow rate
30 person per minute