4040 ro membrane for industrial drinking water system waste water
Reverse osmosis is one of the most common and effective water
treatment systems. The primary filtering media in these systems is
an RO membrane. Depending on your application, we offer different
reverse osmosis membranes suited for sea water desalination,
brackish water, and high flow commercial applications.
This kind of film separation technology, it is to rely on through
the film under the pressure of the solvent solution and the process
of the solute separation. The membranes can work under ultra low
pressure to reach as high permeate flow and salt rejection as
regular low pressure composite membrane, and achieves a salt
rejection rate of up to at least 97%, and operating cost for the RO
system, thus increasing the economic efficiency. reverse osmosis
film are not available through is trapped.
1. Material: Polypropylene;
2. corrosion resistance,rust resistance;
3. specification: 50G/ 75G/ 100G/150G/200G/300G/400G
4. anti-aging, long service life;
5. superb surface finish;
6. adequate thermal stability;
7. Replacement Cycle: 3 to 6 months, depending on local water
quality and quantity.
Fangcheng membrane element desalination for surface water and
groundwater, tap water and municipal water treatment on salinity
below about 2000ppm, mainly used in various fields of all sizes of
pure water, boiler water supply, food processing and pharmaceutical
manufacturing industry etc. For a variety of household water,
hospital, laboratory pure water device and other small systems.
your residential reverse osmosis systems alternatives,Interchanges
with and replaces any standard residential membrane
and improve the economic benefit.
Pure water production
Purifled water system for electronics
For chemical supply water system
Recycling of normal industry waste water
Laboratory water in medical treatment
Recharge feed waterin thermal supply/power plant/boilers
Household water purifier,
Water purifying devices in hospital and laboratory etc.
Semipermeable membrane to remove ions, molecules, and larger
particles from drinking water
Can remove chlorine, fluoride,bacteria, microorganism, etc
|Stable Desalination %||96~98%||96~98%||96~98%||96~98%|
Mean Permeable Flow GDP (L/d)
|Active Film Area ft2(m2)||4(0.4)||4.2(0.42)||5.0(0.5)||5.3(0.53)|
|Test Condition||Test Pressure||65pai(0.45Mpa)|
|Test Water Temperature||25℃|
|Test Water Concentration(NaCl)||500ppm|
|Test Water PH||6.5-7.5|
|Recycle Rate %||15|
|Max Operating Temp.||300psi(2.0Mpa)|
|Max. Inlet Water Temp.||45°C|
|Max Water Inlet Silt Density Index (SDI)||5|
|Inlet Water Chlorine Tolerance||<0.1mg/l|
|Inlet Water PH Range, Continuous Operation||3~10|
|Inlet Water PH Range, Short-Term Cleaning||2~11|
|Max. Pressure Drop of Single Membrane||10psi(0.07Mpa)|
1. Q: Where is your factory, which port for transportation?
A: Our factory located in Xiamen, Welcome to vist our factory. the
port is Xiamen port.
2. Q: How can I get some samples?
A: We are glad to provide you the free sample, leave your contact
3. Q: Can you accept OEM & ODM?
A: Yes, we can accept OEM &ODM
4. Q: What is the delivery time?
A: Within 7 days after receive your payment, accordding to your
5. How to make payment?
A: We accpet T/T,Paypal.Western Union and cash face to face.
6. Q: How can I contact you?
A: Please contact us though below methods, we will reply you within